Safes - Page 3 - Mega Sale! Save up to 22%


Mega Sale! Up to 22% off on Safes at Hydraulic Hose Fittings, Page 3. Top brands include Tamper-Pruf, Morse Cutting Tools, Securitron, YG-1, & Tranax. Hurry! Limited time offers. Offers valid only while supplies last.



M5 x 0.8 x 12mm Security Machine Screw - Button Torx Head - 18-8 Stainless Steel - FT - UNC - 100 Pk
M5 x 0.8 x 12mm Security Machine Screw - Button Torx Head - 18-8 Stainless Steel - FT - UNC - 100 Pk
By Tamper-Pruf
In Stock
$75.00
4.0 out of 5 stars with 25 reviews
Security fasteners provide an added level of security by their drive design that prevents removal with ordinary screw drivers. Maximum torque transfer & positive tool engagement means easier drive installation with less pressure & slippage. Requires matching driver bit.Button Head screws are typically used for general purposes with a lower crown & shallower recess than round head screws.Specification: BRAND: Tamper-PrufMANUFACTURERS PART NUMBER: 230200DESCRIPTION: Tamper Resistant Machine


Morse Cutting Tools 93011 - Screw Machine Length Drill Bit - 2 mm Carbide, 19 mm Flute, 135° Point, 45 mm OAL
Morse Cutting Tools 93011 - Screw Machine Length Drill Bit - 2 mm Carbide, 19 mm Flute, 135° Point, 45 mm OAL
By Morse Cutting Tools
In Stock
$80.53

mpn: NA, ean: 7439056226226,

4.0 out of 5 stars with 83 reviews
Specification: material: Carbideseries: 5975Tfinish/coating: ALTiNdrill bit size: 2 mmpoint angle: 135 flute length: 19 mmoverall length: 45 mmcoolant delivery: Externalmaterial: Carbide. series: 5975T. finish/coating: ALTiN. drill bit size: 2 mm. point angle: 135.


Securitron Face Mount Magnalock Electromagnetic Lock with Conduit, 1200lbs Holding Force, 12/24VDC
Securitron Face Mount Magnalock Electromagnetic Lock with Conduit, 1200lbs Holding Force, 12/24VDC
By Securitron
In Stock
$249.99

mpn: M62FG, ean: 0784607028444,

4.5 out of 5 stars with 127 reviews
This 1200 lbs. holding force Magnalock with automatic dual voltage. Recommended for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.Patented instant release circuit - no residual magnetism. Fully sealed electronics - tamper proof and weatherproof. Surface mounts easily with minimal tools. Mounted using steel machine screws into blind finishing nuts. All ferrous metal surfaces plated to MIL specification.


Morse Cutting Tools 91517 - Screw Machine Length Drill Bitx23;38 Cobalt, 14 mm Flute, 130° Point, 43 mm OAL
Morse Cutting Tools 91517 - Screw Machine Length Drill Bitx23;38 Cobalt, 14 mm Flute, 130° Point, 43 mm OAL
By Morse Cutting Tools
In Stock
$60.26

mpn: NA, ean: 7439056921978,

4.5 out of 5 stars with 28 reviews
Specification: material: Cobaltdrill bit size: #38finish/coating: TiNflute length: 14 mmpoint angle: 130 parabolic flutes: Yesoverall length: 43 mmcoolant delivery: Externalseries: 1360Gmaterial grade: M35material: Cobalt. drill bit size: #38. finish/coating: TiN. flute length: 14 mm. point angle: 130.


Morse Cutting Tools 92230 - Screw Machine Length Drill Bit - 1/32 in Carbide, 1/2 in Flute, 135° Point, 1-1/2 in OAL
Morse Cutting Tools 92230 - Screw Machine Length Drill Bit - 1/32 in Carbide, 1/2 in Flute, 135° Point, 1-1/2 in OAL
By Morse Cutting Tools
In Stock
$87.73

mpn: NA, ean: 7439056025058,

4.1 out of 5 stars with 58 reviews
Specification: material: Carbideseries: 5375Tfinish/coating: ALTiNdrill bit size: 1/32 inpoint angle: 135 flute length: 1/2 inoverall length: 1-1/2 incoolant delivery: Externalmaterial: Carbide. series: 5375T. finish/coating: ALTiN. drill bit size: 1/32 in. point angle: 135.


Morse Cutting Tools 80978 - MARXMAN™ Screw Machine Length Drill Bit - 1/2 in HSS, 2-1/4 in Flute, 118° Point, 3-3/4 in OAL
Morse Cutting Tools 80978 - MARXMAN™ Screw Machine Length Drill Bit - 1/2 in HSS, 2-1/4 in Flute, 118° Point, 3-3/4 in OAL
By Morse Cutting Tools
In Stock
$63.61

mpn: NA, ean: 7439056723732,

4.7 out of 5 stars with 51 reviews
Specification: material: High Speed Steelseries: 435finish/coating: Brightdrill bit size: 1/2 inpoint angle: 118 flute length: 2-1/4 inoverall length: 3-3/4 incoolant delivery: Externalmaterial: High Speed Steel. series: 435. finish/coating: Bright. drill bit size: 1/2 in. point angle: 118.


Morse Cutting Tools 92693 - Screw Machine Length Drill Bitx23;33 Carbide, 7/8 in Flute, 140° Point, 1-7/8 in OAL
Morse Cutting Tools 92693 - Screw Machine Length Drill Bitx23;33 Carbide, 7/8 in Flute, 140° Point, 1-7/8 in OAL
By Morse Cutting Tools
In Stock
$94.82

mpn: NA, ean: 7439056325349,

4.3 out of 5 stars with 89 reviews
Specification: material: Carbideseries: 5376Tfinish/coating: ALTiNdrill bit size: #33point angle: 140 flute length: 7/8 inoverall length: 1-7/8 incoolant delivery: Externalmaterial: Carbide. series: 5376T. finish/coating: ALTiN. drill bit size: #33. point angle: 140.


YG-1 Tool Company D4107088 - Screw Machine Length Drill Bit, Drill Bit Size: 8.8mm, Flute Length: 40mm, Overall Length: 84mm
YG-1 Tool Company D4107088 - Screw Machine Length Drill Bit, Drill Bit Size: 8.8mm, Flute Length: 40mm, Overall Length: 84mm
By YG-1
In Stock
$57.71

mpn: NA, ean: 7439056720700,

4.0 out of 5 stars with 13 reviews
Specification: material: Cobalt High Speed Steelparabolic flutes: Nofinish/coating: TiNcoolant delivery: Externalpoint type: Split Pointspiral/cut: Right Hand Spiral/Right Hand Cutoverall length: 84 mmdouble margin: Noshank type: Plain Roundmaterial grade: M42drill bit size: 8.8 mmspecification: DIN 1897flute length: 40 mmmaterial: Cobalt High Speed Steel. parabolic flutes: No. finish/coating: TiN. coolant delivery: External. point type: Split Point.


Hantle / Tranax ATM Machine Key for Top Bezel & Vault Door
Hantle / Tranax ATM Machine Key for Top Bezel & Vault Door
By Tranax
In Stock
$22.99
$17.99
You Save: 22%

mpn: 1700, ean: 0000230200591,

4.5 out of 5 stars with 58 reviews
Compatible with Tranax / Hantle 1700, 1705, E4000, & C4000.


Morse Cutting Tools 60007 - Screw Machine Length Drill Bit - 2.2 mm Cobalt, 13 mm Flute, 130° Point, 40 mm OAL
Morse Cutting Tools 60007 - Screw Machine Length Drill Bit - 2.2 mm Cobalt, 13 mm Flute, 130° Point, 40 mm OAL
By Morse Cutting Tools
In Stock
$61.92

mpn: NA, ean: 7439056422499,

4.7 out of 5 stars with 139 reviews
Specification: material: Cobaltdrill bit size: 2.2 mmfinish/coating: TiALNflute length: 13 mmpoint angle: 130 coolant delivery: Externaloverall length: 40 mmmaterial grade: M35series: 1360Tmaterial: Cobalt. drill bit size: 2.2 mm. finish/coating: TiALN. flute length: 13 mm. point angle: 130.


Morse Cutting Tools 60070 - Screw Machine Length Drill Bit - 4.8 mm Cobalt, 26 mm Flute, 130° Point, 62 mm OAL
Morse Cutting Tools 60070 - Screw Machine Length Drill Bit - 4.8 mm Cobalt, 26 mm Flute, 130° Point, 62 mm OAL
By Morse Cutting Tools
In Stock
$99.90

mpn: NA, ean: 7439056023085,

4.5 out of 5 stars with 62 reviews
Specification: material: Cobaltdrill bit size: 4.8 mmfinish/coating: TiALNflute length: 26 mmpoint angle: 130 coolant delivery: Externaloverall length: 62 mmmaterial grade: M35series: 1360Tmaterial: Cobalt. drill bit size: 4.8 mm. finish/coating: TiALN. flute length: 26 mm. point angle: 130.


Morse Cutting Tools 92697 - Screw Machine Length Drill Bit - 1/8 in Carbide, 7/8 in Flute, 140° Point, 1-7/8 in OAL
Morse Cutting Tools 92697 - Screw Machine Length Drill Bit - 1/8 in Carbide, 7/8 in Flute, 140° Point, 1-7/8 in OAL
By Morse Cutting Tools
In Stock
$94.82

mpn: NA, ean: 7439056221207,

4.4 out of 5 stars with 125 reviews
Specification: material: Carbideseries: 5376Tfinish/coating: ALTiNdrill bit size: 1/8 inpoint angle: 140 flute length: 7/8 inoverall length: 1-7/8 incoolant delivery: Externalmaterial: Carbide. series: 5376T. finish/coating: ALTiN. drill bit size: 1/8 in. point angle: 140.


M6 x 1.0 x 16mm Security Machine Screw - Button Torx Head - 18-8 Stainless Steel - FT - UNC - 100 Pk
M6 x 1.0 x 16mm Security Machine Screw - Button Torx Head - 18-8 Stainless Steel - FT - UNC - 100 Pk
By Tamper-Pruf
In Stock
$95.47
4.1 out of 5 stars with 32 reviews
Security fasteners provide an added level of security by their drive design that prevents removal with ordinary screw drivers. Maximum torque transfer & positive tool engagement means easier drive installation with less pressure & slippage. Requires matching driver bit.Button Head screws are typically used for general purposes with a lower crown & shallower recess than round head screws.Specification: BRAND: Tamper-PrufMANUFACTURERS PART NUMBER: 230380DESCRIPTION: Tamper Resistant Machine


Morse Cutting Tools 60011 - Screw Machine Length Drill Bit - 3/32 in Cobalt, 14 mm Flute, 130° Point, 43 mm OAL
Morse Cutting Tools 60011 - Screw Machine Length Drill Bit - 3/32 in Cobalt, 14 mm Flute, 130° Point, 43 mm OAL
By Morse Cutting Tools
In Stock
$65.20

mpn: NA, ean: 7439056623674,

4.2 out of 5 stars with 108 reviews
Specification: material: Cobaltdrill bit size: 3/32 infinish/coating: TiALNflute length: 14 mmpoint angle: 130 coolant delivery: Externaloverall length: 43 mmmaterial grade: M35series: 1360Tmaterial: Cobalt. drill bit size: 3/32 in. finish/coating: TiALN. flute length: 14 mm. point angle: 130.


Morse Cutting Tools 91504 - Screw Machine Length Drill Bitx23;45 Cobalt, 12 mm Flute, 130° Point, 38 mm OAL
Morse Cutting Tools 91504 - Screw Machine Length Drill Bitx23;45 Cobalt, 12 mm Flute, 130° Point, 38 mm OAL
By Morse Cutting Tools
In Stock
$57.64

mpn: NA, ean: 7439056921954,

4.6 out of 5 stars with 14 reviews
Specification: material: Cobaltdrill bit size: #45finish/coating: TiNflute length: 12 mmpoint angle: 130 parabolic flutes: Yesoverall length: 38 mmcoolant delivery: Externalseries: 1360Gmaterial grade: M35material: Cobalt. drill bit size: #45. finish/coating: TiN. flute length: 12 mm. point angle: 130.


Morse Cutting Tools 60022 - Screw Machine Length Drill Bit - 7/64 in Cobalt, 16 mm Flute, 130° Point, 46 mm OAL
Morse Cutting Tools 60022 - Screw Machine Length Drill Bit - 7/64 in Cobalt, 16 mm Flute, 130° Point, 46 mm OAL
By Morse Cutting Tools
In Stock
$65.48

mpn: NA, ean: 7439056623681,

4.8 out of 5 stars with 67 reviews
Specification: material: Cobaltdrill bit size: 7/64 infinish/coating: TiALNflute length: 16 mmpoint angle: 130 coolant delivery: Externaloverall length: 46 mmmaterial grade: M35series: 1360Tmaterial: Cobalt. drill bit size: 7/64 in. finish/coating: TiALN. flute length: 16 mm. point angle: 130.


M3.5 x 0.6 x 30mm Security Machine Screw - Flat Torx Head - 18-8 Stainless Steel - FT - UNC - 100 Pk
M3.5 x 0.6 x 30mm Security Machine Screw - Flat Torx Head - 18-8 Stainless Steel - FT - UNC - 100 Pk
By Tamper-Pruf
In Stock
$69.00
4.7 out of 5 stars with 70 reviews
Security fasteners provide an added level of security by their drive design that prevents removal with ordinary screw drivers. Maximum torque transfer & positive tool engagement means easier drive installation with less pressure & slippage. Requires matching driver bit.Flat Head screws install flush with metal surfaces or countersinks with softer materials for a clean appearance.Specification: BRAND: Tamper-PrufMANUFACTURERS PART NUMBER: 230596DESCRIPTION: Tamper Resistant Machine ScrewSIZE:


Morse Cutting Tools 91523 - Screw Machine Length Drill Bitx23;35 Cobalt, 16 mm Flute, 130° Point, 46 mm OAL
Morse Cutting Tools 91523 - Screw Machine Length Drill Bitx23;35 Cobalt, 16 mm Flute, 130° Point, 46 mm OAL
By Morse Cutting Tools
In Stock
$61.92

mpn: NA, ean: 7439056022002,

4.6 out of 5 stars with 57 reviews
Specification: material: Cobaltdrill bit size: #35finish/coating: TiNflute length: 16 mmpoint angle: 130 parabolic flutes: Yesoverall length: 46 mmcoolant delivery: Externalseries: 1360Gmaterial grade: M35material: Cobalt. drill bit size: #35. finish/coating: TiN. flute length: 16 mm. point angle: 130.


Morse Cutting Tools 91528 - Screw Machine Length Drill Bitx23;32 Cobalt, 16 mm Flute, 130° Point, 46 mm OAL
Morse Cutting Tools 91528 - Screw Machine Length Drill Bitx23;32 Cobalt, 16 mm Flute, 130° Point, 46 mm OAL
By Morse Cutting Tools
In Stock
$61.92

mpn: NA, ean: 7439056022026,

4.0 out of 5 stars with 22 reviews
Specification: material: Cobaltdrill bit size: #32finish/coating: TiNflute length: 16 mmpoint angle: 130 parabolic flutes: Yesoverall length: 46 mmcoolant delivery: Externalseries: 1360Gmaterial grade: M35material: Cobalt. drill bit size: #32. finish/coating: TiN. flute length: 16 mm. point angle: 130.


Morse Cutting Tools 60016 - Screw Machine Length Drill Bitx23;39 Cobalt, 14 mm Flute, 130° Point, 43 mm OAL
Morse Cutting Tools 60016 - Screw Machine Length Drill Bitx23;39 Cobalt, 14 mm Flute, 130° Point, 43 mm OAL
By Morse Cutting Tools
In Stock
$63.72

mpn: NA, ean: 7439056510530,

4.1 out of 5 stars with 141 reviews
Specification: material: Cobaltdrill bit size: #39finish/coating: TiALNflute length: 14 mmpoint angle: 130 coolant delivery: Externaloverall length: 43 mmmaterial grade: M35series: 1360Tmaterial: Cobalt. drill bit size: #39. finish/coating: TiALN. flute length: 14 mm. point angle: 130.



Viewing Page 3 of 4

View more products in Safety & Security.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - hydraulic-hosefittings.com. All Rights Reserved.