|5-2 Room, Building #2 Huanhe Center, No.163 Ruiqing Road, Jiangdong District, Ningbo, Chinafirstname.lastname@example.org|
|Place of Origin:||China|
|Brand Name:||Jazzy Industrial|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||Export carton packaging, lined with plastic bag, placed inside the wooden-case|
|Standard Scope:||SAE , DIN , ISO , JIS||Thread Type:||BSP , BSPT ,NPT , JIC ,NPTF|
|Surface Treatment:||Color Zinc Plating , White Zine Plating , Cr-3 Plating||Parker’s P/N:||PNTX|
PNTX 37 Degree Male Tube Connector Hydraulic Adapter Fittings
|ITEM||P/N||B(SAE 37)||C1 HEX||L3||T||Parker’s P/N|
|8||2408-12||1 1/16-12||1.125||1.280||0.380||12 PNTX|
|9||2408-14||1 3/16-12||1.250||1.312||0.380||14 PNTX|
|10||2408-16||1 5/16-12||1.375||1.330||0.380||16 PNTX|
|11||2408-20||1 5/8-12||1.688||1.450||0.460||20 PNTX|
|12||2408-24||1 7/8-12||2.000||1.650||0.530||24 PNTX|
|13||2408-32||2 1/2-12||2.625||2.005||0.680||32 PNTX|
Assembly notes when the NPTF screw assembly, use the appropriate lubricant, to reduce the death and
seal effect; O- RING gasket shall be clamped on the joints, gaskets are installed, sliding to the root, the
formation of interference clamping. The tightness of the gasket should not because of its own weight to
fall from the top of the loose, clamping interference will not exceed the three is shown in table JI453.
The torsion gasket is placed away from an end face the most distant, see 10A. note to Y diameter and
gasket assembly not lock nut thread transition place. This will lead to the loosening of the flatness of the
gasket gasket. Such as SAEJ1453 are shown in Table 3. Any uneven surface must be uniform (not wave
shape) with O-RING and concave inner end. Table 2A said the torque value is to control the test setup in
accordance with table 1 assembly requirements, the manufacturer's recommended torque value
assembly Look at the small size in table 2A. 37 joints with different degree (-2-8), compared with large
size, high torque required for excessive torque. Over these connections will cause a 37 degree cone
deformation, excessive deformation
Our QC procedure:
As we had more than 5 professional and technical personal, they ensure 100% products checking.
1. Material checking: strictly control of material using, meet international requested standards;
2. semi-finished products inspection: product inspection before 100% finished ;
3. production line test: with work team or data engineer who will inspect matchines and lines at fixed
4. finished prodcuct inspection: quality and property test before products are plated zinc, packed and
Shipping & Service:
1. Orders will be dispatched around in 30 days after payment, depending on quantities.
2. We Always choose the most economical and reliable shipping company to make sure you receive the goods in time.
3. The tracking number will be provided to you once the consignment is shipped
4. Professional customer service to answer your questions or fix problems regarding your order.